Effect of heat treatment on the strength and thermophysical characteristics of polyimide carbon fiber reinforced plastic
1Federal State Unitary Enterprise «All-Russian Scientific-Research Institute of Aviation Materials» of National Research Center «Kurchatov Institute», Moscow, Russia; admin@viam.ru
In the study was investigated the effect of additional heat treatment at temperatures of 300, 320, and 350 °C on the properties of polyimide-based carbon fiber reinforced plastic. It was shown that increasing the post-curing temperature raises the glass transition temperature from 336 to 358 °C. When tested under room temperature conditions and after heat treatment, the flexural strength and interlaminar shear strength of the material decreased. Furthermore, the heat treatment influenced the thermophysical properties: coefficient of linear thermal expansion, thermal conductivity, thermal diffusivity and specific heat capacity.
- Mukhametov R.R., Petrova A.P. Thermosetting Binders for Polymer Composite Materials: Textbook. Ed. E.N. Kablov. Moscow: NRC «Kurchatov Institute» – VIAM, 2021, 528 p.
- Kablov E.N., Startsev V.O. Systematical analysis of the climatics influence on mechanical properties of the polymer composite materials based on domestic and foreign sources (review). Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 47–58. DOI: 10.18577/2071-9140-2018-0-2-47-58.
- Xiaochen L., Bo C.J., Thomas K.T., Steven N. Thermo-oxidative aging and thermal cycling of PETI-340M composites. High Performance Polymers, 2022, vol. 34, pp. 33–43.
- Bain S., Ozawa S., Jim M., Criss Jr. Development of a Cure/Postcure Cycle for PETI-330 Laminates Fabricated by Resin Transfer Molding. High Performance Polymers, 2006. Available at: https://www.academia.edu/5559484/Development of a Cure Postcure Cycle for PETI-330 Laminates Fabricated by Resin Transfer Molding (accessed: April 10, 2026).
- Fernberg P., Gong G., Mannberg P., Tsampas S. Development of novel high Tg polyimide-based composites. Part I: RTM processing properties. Journal of Composite Materials, 2018, vol. 52, no. 2, pp. 253–260.
- Gao S.Z., Huang Z.Q., Wang X.L. et al. Research on Properties of 450 °С Resistant Polyimide Composites. Journal of Physics: Conference Series (ISALT 2022), 2023, vol. 2460, no. 012091, pp. 1–8. DOI: 10.1088/1742-6596/2460/1/012091.
- Mikhailin Yu.A. Heat-Resistant Polymers and Polymeric Materials. St. Petersburg: Professiya, 2006, 624 p.
- Kerber M.L., Vinogradov V.M., Golovkin G.S. et al. Polymer Composite Materials: Structure, Properties, Technology: Textbook. Ed. A.A. Berlin. St. Petersburg: Professiya, 2008, 560 p.
- Valueva M.I., Zelenina I.V., Nacharkina A.V., Ahmadieva K.R. Technological features of obtaining high temperature polyimide carbons. Foreign experience (review). Trudy VIAM, 2022, no. 6 (112), pp. 80–95. Available at: http://www.viam-works.ru (accessed: April 10, 2026). DOI: 10.18577/2307-6046-2022-0-6-80-95.
- CYCOM®5250 Bismaleimide Resin. Technical Data Sheet. Cytec engineered materials. 2017. Available at: https://www.solvay.com/en/product/cycom-5250-4 (accessed: April 03, 2026).
- Nacharkina A.V., Valueva M.I., Zelenina I.V., Shosheva A.L. High-temperature carbon fiber reinforced plastics based on bismaleinimide binders. Aviation materials and technologies, 2024, no. 4 (77), pp. 43–61. Available at: http://www.journal.viam.ru (accessed: April 10, 2026). DOI: 10.18577/2713-0193-2024-0-4-43-61.
- Mikhailin Yu.A. Heat, Thermal, and Fire Resistance of Polymer Materials. St. Petersburg: Nauchnyye osnovy i tekhnologii, 2011, 416 p.
- Strelnikov V.N., Ivanova E.V., Lebedeva Е.А., Trukhinov D.K., Astafeva S.А. Development and research of the properties of thermoplastic elastomer composites with functional fillers. Aviation materials and technologies, 2026, no. 1 (82), pp. 195–208. Available at: http://www.journal.viam.ru (accessed: April 28, 2026). DOI: 10.18577/2713-0193-2026-0-1-195-208.
- Gulyaev I.N., Klimenko O.N., Lonskii S.L., Slavin A.V., Cherfas L.V. Determination of the composition and structure of polymer composite materials. Aviation materials and technologies, 2025, no. 4 (81), pp. 32–47. Available at: http://www.journal.viam.ru (accessed: April 14, 2026). DOI: 10.18577/2713-0193-2025-0-4-32-47.
- Valueva M.I., Zelenina I.V., Zharinov M.A., Khaskov M.A. High-Temperature Carbon Fiber Reinforced Plastics Based on a Thermoreactive Polyimide Binder. Inorganic Materials: Applied Research, 2021, vol. 12, no. 6, pp. 1581–1589.
- Adamczak A.D. High temperature materials for aerospace applications. Texas A&M University, 2011, 139 p.
- Choy C.L., Luk W.H., Chen F.C. Thermal conductivity of highly oriented polyethylene. Polymer, 1978, vol. 19, pp. 155–162.
- Fei H., Dai W., Yu J. et al. Thermal diffusivity and thermal conductivity of polyimide composites. Journal of Applied Polymer Science, 2019, vol. 136, no. 15, p. 47336.
- Pielichowska K. Polyimide-based composites for high-temperature applications. Progress in Materials Science, 2014, vol. 67, pp. 173–232.
- Xiong X., Yang S.Y., Ji M. et al. Thermal expansion behavior of polyimide composites. Polymer Composites, 2018, vol. 39, no. S3, pp. E1688–E1695.
