UDC
621.791
DOI
10.18577/2307-6046-2026-0-9-33-46
Article PDF (Russian) (1.48 MB)
How to cite
Panteleev M.D., Fink A.Yu., Sviridov A.V., Dementev Z.S. Laser cladding of aluminum alloy AD33 // Proceedings of VIAM. 2026. No. 9 (163). С. 33-46. URL: https://www.viam-works.ru. DOI: 10.18577/2307-6046-2026-0-9-33-46.

Laser cladding of aluminum alloy AD33

Panteleev M.D., Fink A.Yu., Sviridov A.V., Dementev Z.S.
Abstract

The paper compares laser and argon-arc cladding for aluminum alloy AD33. Weldability was studied, then a suitable filler material was selected for cladding. Following non-destructive tomographic testing were tested welding modes, providing defect-free cladding. A comparative analysis of the welding thermal cycle on the microstructure and microhardness distribution in the cross-section of cladded samples from AD33 aluminum revealed the superior performance of laser cladding over argon-arc cladding.

Keywords
aluminum alloys, weldability, hot cracks, filler wire, restoration cladding, laser cladding, argon-arc cladding

Reference list
  1. Fridlyander I.N. Modern aluminum, magnesium alloys and composite materials based on them. Metallovedeniye i termicheskaya obrabotka metallov, 2002, no. 7, pp. 24–29.
  2. Alieva S.G., Altman M.B., Ambartsumyan S.M. Industrial aluminum alloys: reference publication. 2nd ed., rev. and add. Moscow: Metallurgiya, 1984, 528 p.
  3. Beletsky V.M., Krivov G.A. Aluminum alloys (Composition, properties, technology, application). Kiev: Komitetkh, 2005, 365 p.
  4. Kablov E.N., Belov E.V., Trapeznikov A.V., Leonov A.A., Zaitsev D.V. Strengthening features and aging kinetics of high-strength cast aluminum alloy AL4MS based on Al–Si–Cu–Mg system. Aviation materials and technologies, 2021, no. 2 (63), pp. 24–34. Available at: http://www.journal.viam.ru (accessed: December 01, 2025). DOI: 10.18577/2713-0193-2021-0-2-24-34.
  5. Ivanov A.L., Shlyapnikova T.A., Somov A.V., Selivanov A.A., Benarieb I., Mitasov M.M., Oleinik I.I., Polovyanenko D.N. Low-deformation quenching of sheets of aluminum alloy V95pch in a low-concentration water-polymer medium based on domestic components. Aviation materials and technologies, 2025, no. 3 (80), pp. 47–62. Available at: http://www.journal.viam.ru (accessed: December 02, 2025). DOI: 10.18577/2713-0193-2025-0-3-47-62.
  6. Kablov E.N., Duyunova V.A., Benarieb I., Puchkov Yu.A., Sbitneva S.V. Features of the decomposition of a supercooled solid solution during hardening of sheets of B-1341 alloy. Tekhnologiya legkikh splavov, 2020, no. 3, pp. 20–33. DOI: 10.18577/2071-9140-2020-0-3-20-33.
  7. Kablov E.N., Lukina E.A., Sbitneva S.V., Khokhlatova L.B., Zaitsev D.V. Formation of metastable phases during the decomposition of a solid solution during artificial aging of Al alloys. Tekhnologiya legkikh splavov, 2016, no. 3, pp. 7–17. DOI: 10.18577/2071-9140-2015-0-1-3-33.
  8. Kolobnev N.I., Ber L.B., Khokhlatova L.B., Ryabov D.K. Structure, Properties, and Application of Al–Mg–Si–(Cu) System Alloys. Metallovedenie i termicheskaya obrabotka metallov, 2011, no. 9, pp. 40–45.
  9. Selivanov A.A., Antipov K.V., Oglodkova Yu.S., Rudchenko A.S. Structure and Properties of Sheets from the New Alloy B-1381. Perspektivnye materialy, 2021, no. 5, pp. 18–27. DOI: 10.30791/1028-978X-2021-5-18-27.
  10. Benarieb I., Puchkov Yu.A., Shumeiko R.M. Influence of heat treatment modes on the structure and resistance to general and local corrosion of sheets made of aluminum alloy B-1341 of the Al–Mg–Si system. Tekhnologiya legkikh splavov, 2025, no. 3, pp. 18–32. DOI: 10.18698/0236-3941-2016-2-125-133.
  11. Benarieb I., Sbitneva S.V., Zaytsev D.V., Shorstov S.Yu. Features of quench-induced precipitation in sheets of V-1341 aluminum alloy of Al–Mg–Si system. Trudy VIAM, 2025, no. 8 (150), pp. 53–66. Available at: http://www.viam-works.ru (accessed: December 02, 2025). DOI: 10.18577/2307-6046-2025-0-2-53-66.
  12. Benarieb I., Romanenko V.A., Klochkova Yu.Yu., Ovchinnikov V.V., Sbitneva S.V. Application of hightech aluminum alloy V-1341 of Al–Mg–Si system for pipelines of aircraft products. Trudy VIAM, 2020, no. 11 (93), pp. 21–30. Available at: http://www.viam-works.ru (accessed: December 02, 2025). DOI: 10.18577/2307-6046-2020-0-11-21-30.
  13. Nikolaev G.A., Fridlyander I.N., Arbuzov Yu.P. Weldable aluminum alloys. Moscow: Metallurgiya, 1990, 296 p.
  14. Nikiforov T.D. Metallurgy of fusion welding of aluminum alloys. Moscow: Mashinostroenie, 1972, 264 p.
  15. Yakushin B.F., Makarov E.L. Theory of weldability of steels and alloys. Moscow: Publ. house of MSTU im.N.E. Bauman, 2018, 487 p.
  16. Likhanskii V.V., Ulybyshev K.E., Elkin N.N. Numerical simulations of the processes induced by laser shock peening in AMg6 aluminum alloy. Aviation materials and technologies, 2025, no. 2 (79), pp. 33–47. Available at: http://www.journal.viam.ru (accessed: December 11, 2025). DOI: 10.18577/2713-0193-2025-0-2-33-47.
  17. Rykalin N.N., Uglov A.A., Zuev I.V., Kokora A.N. Laser and Electron-Beam Processing of Materials: Handbook. Moscow: Mashinostroenie, 1985, 496 p.
  18. Volchenko V.N., Yampolsky V.M., Vinokurov V.A. et al. Theory of Welding Processes. Ed. V.V. Frolov. Moscow: Vysshaya shkola, 1988, 559 p.
  19. Lukin V.I., Kovalchuk V.G., Ioda E.N. Fusion welding is a core of welding manufacturing. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 130–143. DOI: 10.18577/2071-9140-2017-0-S-130-143.
  20. Panteleev M.D., Sviridov A.V., Skupov A.A. Welding features of heat-resistant aluminum alloys, alloy V-1213 and 1151. Trudy VIAM, 2022, no. 9 (115), pp. 28–39. Available at: http://www.viam-works.ru (accessed: December 11, 2025). DOI: 10.18577/2307-6046-2022-0-9-28-38.
  21. Panteleev M.D., Sviridov A.V., Skupov A.A., Odintsov N.S. Aluminum-Lithium alloy V-1469 welded fuselage constructions survivability. Aviation materials and technologies, 2022, no. 4 (69), pp. 25–35. Available at: http://www.journal.viam.ru (accessed: December 12, 2025). DOI: 10.18577/2713-0193-2022-0-4-25-35.
The article was submitted
2026-01-30
approved and accepted for publication after reviewing
2026-05-27