UDC
669.018.44:669.245
DOI
10.18577/2307-6046-2019-0-5-3-11
Article PDF (Russian)
(589.2 KB)
How to cite
Yakimovitch P.V., Alekseev A.V. Improvement of analytical characteristics for the determination of impurities in high temperature nickel alloys using ICP-MS // Proceedings of VIAM. 2019. No. 5 (77). Ст. 01. URL: https://www.viam-works.ru. DOI: 10.18577/2307-6046-2019-0-5-3-11.
Improvement of analytical characteristics for the determination of impurities in high temperature nickel alloys using ICP-MS
Abstract
In this work, the determination of P, As, Se, Cd, Cu, Zn, Te, Sb in samples of complex alloy nickel alloys by inductively coupled plasma mass spectrometry (ICP-MS) was carried out. The technique of dissolving the sample and preparing it for analysis. Applied different techniques for elimination of spectral interferences and improve sensitivity definitions: reaction-collision cell and mathematical correction. Range of determined concentrations were 0,00001–0,087% by weight, relative standard deviation not greater than 0,05.
Keywords
mass spectrometry with inductively coupled plasma (ICP-MS), nickel alloys, de-termination of impurities, microwave sample preparation.
Reference list
- Kablov E.N. Strategicheskie napravleniya razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda [The strategic directions of development of materials and technologies of their processing for the period to 2030] // Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
- Kablov E.N. Innovacionnye razrabotki FGUP «VIAM» GNC RF po realizacii «Strategicheskih napravlenij razvitiya materialov i tehnologij ih pererabotki na period do 2030 goda» [Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030»] // Aviacionnye materialy i tehnologii. 2015. №1 (34). S. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
- Kablov E.N., Petrushin N.V., Parfenovich P.I. Konstruirovaniye liteynykh zharoprochnykh nikelevykh splavov s polikristallicheskoy strukturoy [Construction of foundry heat-resistant nickel alloys with polycrystalline structure] // Metallovedeniye i termicheskaya obrabotka metallov. 2018. №2 (752). S. 47–55.
- Kablov E.N., Ospennikova O.G., Petrushin N.V., Visik E.M. Monokristallicheskij zharoprochnyj nikelevyj splav novogo pokoleniya s nizkoj plotnostyu [Single-crystal nickel-based superalloy of a new generation with low-density] // Aviacionnye materialy i tehnologii. 2015. №2 (35). S. 14–25. DOI: 10.18577/2071-9140-2015-0-2-14-25.
- Echin A.B., Bondarenko Yu.A. Osobennosti struktury i svojstva nikelevogo monokristallicheskogo splava, poluchennogo v usloviyah peremennogo temperaturnogo gradienta na fronte rosta [Structural features and properties of single-crystal Ni-based superalloy produced under conditions of variable temperature gradient on the solidification front] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №8. St. 01. Available at: http://www.viam-works.ru (accessed: July 07, 2018). DOI: 10.18577/2307-6046-2015-0-8-1-1.
- Kablov E.N., Bondarenko Yu.A., Echin A.B. Razvitiye tekhnologii napravlennoy kristallizatsii liteynykh vysokozharoprochnykh splavov s peremennym upravlyayemym temperaturnym gradiyentom [Development of technology of cast superalloys directional solidification with variable controlled temperature gradient] // Aviacionnyye materialy i tehnologii. 2017. №S. S. 24–38. DOI: 10.18577/2071-9140-2017-0-S-24-38.
- Shein E.A. Tendentsii v oblasti legirovaniya i mikrolegirovaniya zharoprochnykh monokristallicheskikh splavov na osnove nikelya (obzor) [Tendencies in the field of alloying and microalloying of heat resisting single-crystal alloys on the basis of nickel (review)] // Trudy VIAM: elektron. nauch.-tekhnich. zhurn. 2016. №3. St. 02. Available at: http://viam-works.ru (accessed: 07 July, 2018). DOI: 10.18557/2307-6046-2016-0-3-2-2.
- Hu J., Wang H. Determination of Trace Elements in Super Alloy by ICP-MS // Mikrochim. Acta. 2001. Vol. 137. P. 149–155.
- Alekseev A.V., Yakimovich P.V., Min P.G. Opredelenie primesej v splave na osnove niobiya metodom ISP-MS. Chast II [Determination of impurity in alloy based on Nb by ICP-MS. Part II] // Trudy VIAM: elektron. nauch.-tehnich. zhurn. 2015. №7. St. 03. Available at: http://www.viam-works.ru (accessed: April 01, 2019). DOI: 10.18557/2307-6046-2015-0-7-3-3.
- Pupyshev A.A., Epova E.N. Spektralnyye pomekhi poliatomnykh ionov v metode mass-spektrometrii s induktivno svyazannoy plazmoy [Spectral noise of polyatomic ions in the method of mass spectrometry with inductively coupled plasma] // Analitika i kontrol. 2001. T. 5. №4. S. 335–369.
- Gao Y., Liu R., Yang L. Application of chemical vapor generation in ICP-MS: A review // Chinese Science Bulletin 2013. Vol. 58. No. 8. P. 1980–1991.
- Leykin A.Yu., Yakimovich P.V. Sistemy podavleniya spektra'nykh interferentsiy v mass-spektrometrii s induktivno svyazannoy plazmoy [Systems of suppression of spectral interferences in mass spectrometry with inductively coupled plasma] // Zhurnal analiticheskoy khimii. 2012. T. 67. №8. S. 752–762.
- Nie X., Liang Y. Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry // Journal of Central South University 2012. Vol. 19. P. 2416–2420.
- Jakubowski N., Prohaska T., Rottmann L., Vanhaecke F. Inductively coupled plasma- and glow discharge plasma-sector field mass spectrometry // Journal of Analytical Atomic Spectrometry 2011. Vol. 26. P. 693–726.
- Liu H., Chen S., Chang P. yet al. Determination of bismuth, selenium and tellurium in nickel-based alloys and pure copper by flow-injection hydride generation atomic absorption spectrometry with ascorbic acid prereduction and cupferron chelation extraction // Analytica Chimica Acta. 2002. Vol. 459. P. 161–168.
- Yakubenko E.V., Voytkova Z.A., Chernikova I.I., Ermolayeva T.N. Mikrovolnovaya probopodgotovka dlya opredeleniya Si, P, V, Cr, Mn, Ni, Cu, W metodom AES-ISP v konstruktsionnykh stalyakh [Microwave sample preparation for the determination of Si, P, V, Cr, Mn, Ni, Cu, W by AES-ICP method in structural steels] // Zavodskaya laboratoriya. Diagnostika materialov. 2014. T. 80. №1. S. 12–15.
