UDC
678.8
DOI
10.18577/2307-6046-2014-0-8-4-4
Article PDF (Russian) (499.15 KB)
How to cite
Timoshkov P.N., Khrulkov A.V. Modern technologies of hotmelt polymer composite materials processing // Proceedings of VIAM. 2014. No. 8. Ст. 04. URL: https://www.viam-works.ru. DOI: 10.18577/2307-6046-2014-0-8-4-4.

Modern technologies of hotmelt polymer composite materials processing

Timoshkov P.N., Khrulkov A.V.
Abstract

At present time polymer composite materials (PCM) based on hotmelt binder have become increasingly popular displacing traditional solvent-based PCM. This fact make possible the emergence of perspective new ways of PCM processing and allows to sim-plify and reduce the cost of PCM-based constructions and products forming process. To make it real new technological processes and new types of industrial equipment having different characteristics compared with previously known, and a number of associated auxiliary equipment have been developed.

Reference list
  1. Kablov E.N. Strategicheskie napravlenija razvitija materialov i tehnologij ih perera-botki na period do 2030 goda [Strategic directions of development of materials and technologies to process them for the period up to 2030] //Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
  2. Kablov E.N., Starcev O.V., Krotov A.S., Kirillov V.N. Klimaticheskoe starenie kompozicionnyh materialov aviacionnogo naznachenija. III. Znachimye faktory starenija [Climatic aging of composite materials for aircraft industry. III. Significant factors of aging] //Deformacija i razrushenie materialov. 2011. №1. S. 34–40.
  3. Kablov E.N. Aviakosmicheskoe materialovedenie [Aerospace Materials] //Vse materialy. Jenciklopedicheskij spravochnik. 2008. №3. S. 2–14.
  4. Muhametov R.R., Ahmadieva K.R., Chursova L.V., Kogan D.I. Novye polimernye svjazujushhie dlja perspektivnyh metodov izgotovlenija konstrukcionnyh voloknistyh PKM [New polymeric binders for advanced manufacturing techniques of structural fibrous RMB] //Aviacionnye materialy i tehnologii. 2011. №2. S. 38–42.
  5. Sokolov I.I., Raskutin A.E. Ugleplastiki i stekloplastiki novogo pokolenija [Carbon and fiberglass new generation] //Trudy VIAM. 2013. №4 (viam-works.ru).
  6. Babin A.N. Svjazujushhie dlja polimernyh kompozicionnyh materialov novogo pokolenija [Binders for polymer composite materials of new generation ] //Trudy VIAM. 2013. №4 (viam-works.ru).
  7. Dushin M.I., Hrul'kov A.V., Kogan D.I., Muhametov R.R., Karavaev R.Ju. Ugleplastiki, polu-chenye metodom infuzii rasplava svjazujushhego [Carbon composites, obtained by infusion melt binder] //Kompozity i nanostruktury. 2013. №2 (18). S. 42–50.
  8. Zwehen C. Assessment of the Science Base for Composite Materials //Advanced Materials by Design. 2011. №3. Р. 73–93.
  9. Bejder Je.Ja., Petrova G.N., Izotova T.F., Barbot'ko S.L. Stekloplastiki na termoplastichnoj matrice [Glass-reinforced on thermoplastic matrix] //Trudy VIAM. 2013. №7. St. 03 (viam-works.ru).
  10. Muhametov R.R., Ahmadieva K.R., Kim M.A., Babin A.N. Rasplavnye svjazujushhie dlja perspektivnyh metodov izgotovlenija PKM novogo pokolenija [Melt binders promising methods of manufacturing a new generation of PCM] //Aviacionnye materialy i tehnologii. 2012. №S. S. 260–265.
  11. McClain M., Goering J. Overview of Recent Developments in 3D Structures /ICCM-17, 3D Textiles & Composites. Edinburgh. 2009.
  12. Grigor'ev M.M., Kogan D.I., Tverdaja O.N., Panina N.N. Osobennosti izgotovlenija PKM metodom RFI [Features manufacturing method RMB RFI] //Trudy VIAM. 2013. №4. St. 03 (viam-works.ru).
  13. http://cavitec-ch.site-preview.net/en/, http://www.centurydesign.com/, http://www.calitzler.com/, http://www.coatema.de/, http://www.mikrosam.com/
  14. Kablov E.N., Starcev O.V., Deev I.S., Nikishin E.F. Svojstva polimernyh kompozicionnyh materialov posle vozdejstvija otkrytogo kosmosa na okolozemnyh orbitah [Properties of polymeric composite materials after exposure to open space in earth orbit] //Vse materialy. Jenciklopedicheskij spravochnik. 2012. №10. S. 2–3.
  15. Dushin M.I., Hrul'kov A.V., Raskutin A.E. K voprosu udalenija izlishkov svjazujushhego pri avtoklavnom formovanii izdelij iz polimernyh kompozicionnyh materialov [On the question of removing excess binder in an autoclave molding products from polymeric composite materials] //Trudy VIAM. 2013. №1. St. 03 (viam-works.ru).
  16. Dushin M.I., Kogan D.I., Hrul'kov A.V., Gusev Ju.A. Prichiny obrazovanija poristosti v izdelijah iz polimernyh kompozicionnyh materialov [Reasons for the formation of porosity in the products of polymeric composite materials] //Kompozity i nanostruktury. 2013. №3 (19). S. 60–71.
  17. Dushin M.I., Chursova L.V., Hrul'kov A.V., Kogan D.I. Osobennosti izgotovlenija polimernyh kompozicionnyh materialov metodom vakuumnoj infuzii [Features manufacture of polymer composite materials using vacuum infusion] //Voprosy materialovedenija. 2013. №3 (75). S. 33–40.