UDC
629.7.023
DOI
10.18577/2307-6046-2014-0-12-7-7
Article PDF (Russian) (852.17 KB)
How to cite
Vinogradov S.S., Nikiforov A.A., S.V. Balakhonov, Leshchev K.A. Ni–B chemical coating's structure and properties investigation // Proceedings of VIAM. 2014. No. 12. Ст. 07. URL: https://www.viam-works.ru. DOI: 10.18577/2307-6046-2014-0-12-7-7.

Ni–B chemical coating's structure and properties investigation

Vinogradov S.S., Nikiforov A.A., S.V. Balakhonov, Leshchev K.A.
Abstract

The microstructure and the phase composition of Ni–B chemical coating have been investigated. The amorphous precipitate is shown to be crystallized during heating, and the layered-columnar structure disappears; microhardness increases and reaches the maximum value of chrome coating’s microhardness. The porosity not changed at 300°C, and thereafter slightly increases at 350‒400°C.

Reference list
  1. Kablov E.N. Strategicheskie napravlenija razvitija materialov i tehnologij ih pererabotki na period do 2030 goda [Strategic directions of development of materials and technologies to process them for the period up to 2030] //Aviacionnye materialy i tehnologii. 2012. №S. S. 7–17.
  2. Kablov E.N. Materialy dlja izdelija «Buran» – innovacionnye reshenija formirovanija shestogo tehnologicheskogo uklada [Materials for the product "Buran" - innovative solutions forming the sixth technological order] //Aviacionnye materialy i tehnologii. 2013. №S1. S. 3–9.
  3. Elagina O.Ju. Tehnologicheskie metody povyshenija iznosostojkosti detalej mashin [Technological methods to improve the wear resistance of machine parts]: Ucheb. posobie. M.: Logos. 2009. 488 s.
  4. Garkunov D.N. Povyshenie iznosostojkosti detalej samoletov [Wear resistance aircraft parts]. M.: Oborongiz. 1960. 142 s.
  5. Tonysheva O.A., Voznesenskaja N.M., Shal'kevich A.B., Petrakov A.F. Issledovanie vlijanija vysokotemperaturnoj termomehanicheskoj obrabotki na strukturu, tehnologicheskie, mehanicheskie i korrozionnye svojstva vysokoprochnoj korrozionnostojkoj stali perehodnogo klassa s povyshennym soderzhaniem azota [Investigation of the effect of high-temperature thermomechanical treatment on the structure, process, mechanical and corrosion properties of high-strength stainless steel transition class with a high content of nitrogen] //Aviacionnye materialy i tehnologii. 2012. №3. S. 31–36.
  6. Tonysheva O.A., Voznesenskaja N.M., Eliseev Je.A., Shal'kevich A.B. Novaja vysokoprochnaja jekonomnolegirovannaja azotsoderzhashhaja stal' povyshennoj nadezhnosti [New high sparingly nitrogen-containing steel of high reliability] //Aviacionnye materialy i tehnologii. 2012. №S. S. 84–88.
  7. Gromov V.I., Kurpjakova N.A., Sedov O.V., Korobova E.N. Vakuumnaja i ionno-plazmennaja himiko-termicheskaja obrabotka otvetstvennyh detalej gazoturbinnyh dvigatelej [Vacuum and ion-plasma chemical-thermal processing of critical parts of gas turbine engines] //Aviacionnye materialy i tehnologii. 2012. №S. S. 147–156.
  8. Ovsepjan S.V., Lukina E.A., Filonova E.V., Mazalov I.S. Formirovanie uprochnjajushhej fazy v processe vysokotemperaturnogo azotirovanija svarivaemogo zharoprochnogo deformiruemogo splava na osnove sistemy Ni‒Co‒Cr [Formation of the reinforcing phase in the high-temperature nitriding process weldable superalloy based wrought alloy of Ni–Co–Cr] //Aviacionnye materialy i tehnologii. 2013. №1. S. 3–8.
  9. Rjabov D.K., Kolobnev N.I., Samohvalov S.V., Mahsidov V.V. Vlijanie predvaritel'nogo estestvennogo starenija na svojstva splava 1913 v iskusstvenno sostarennom sostojanii [Effect of prior natural aging on the properties of the alloy 1913 in the artificially aged condition] //Aviacionnye materialy i tehnologii. 2013. №2. S. 8–11.
  10. Azarovskij E.N., Mubojadzhjan S.A. Modificirovanie poverhnosti detalej iz konstrukcionnyh stalej v vakuumno-dugovoj plazme titana [Surface modification of parts made of structural steel in the vacuum arc plasma titanium] //Aviacionnye materialy i tehnologii. 2013. №3. S. 20–25.
  11. Rjabov D.K., Kolobnev N.I. Izmenenie mehanicheskih svojstv splava 1913 pri dvuhstu-penchatom iskusstvennom starenii [Changes in mechanical properties of the alloy 1913 in the two-stage artificial aging] //Aviacionnye materialy i tehnologii. 2013. №4. S. 3–7.
  12. Solncev St.S. Jerozionnostojkie vlagozashhitnye termoregulirujushhie pokrytija mnogorazovoj teplozashhity orbital'nogo korablja «Buran» [Erosion-resistant waterproof thermal control coating reusable thermal protection orbiter "Buran"] //Aviacionnye materialy i tehnologii. 2013. №S1. S. 94–124.
  13. Ivanov E.V. Sozdanie iznosostojkih i antifrikcionnyh materialov i pokrytij dlja kosmicheskogo korablja «Buran» [Creating a wear-resistant and anti-friction materials and coatings for spacecraft "Buran"] //Aviacionnye materialy i tehnologii. 2013. №S1. S. 142–151.
  14. Azarovskij E.N., Mubojadzhjan S.A. Modificirovanie poverhnosti detalej iz kon-strukcionnyh stalej v vakuumno-dugovoj plazme titana [Surface modification of parts made of structural steel in the vacuum arc plasma titanium]. Chast' II //Aviacionnye materialy i tehnologii. 2014. №1. S. 3–11.
  15. Razuvaev E.I., Kapitanenko D.V. Vlijanie termomehanicheskoj obrabotki na strukturu i svojstva austenitnyh stalej [Effect of thermomechanical treatment on the structure and properties of austenitic steels] //Trudy VIAM. 2013. №5. St. 01 (viam-works.ru).
  16. Rozenenkova V.A., Solncev St.S., Mironova N.A. Tonkoplenochnye pokrytija dlja uplot-nitel'nyh istiraemyh materialov na osnove diskretnyh volokon dlja protochnogo trakta GTD [Thin film coatings for sealing abrasive materials on the basis of discrete fibers to the flow path GTD] //Trudy VIAM. 2013. №5. St. 04 (viam-works.ru).
  17. Markova E.S., Jakusheva N.A., Pokrovskaja N.G., Shal'kevich A.B. Tehnologicheskie osobennosti proizvodstva martensitostarejushhej stali VKS-180 [Technological features of production martensite-aging steel VKS-180] //Trudy VIAM. 2013. №7. St. 01 (viam-works.ru).
  18. Kablov E.N., Lomberg B.S., Ospennikova O.G. Sozdanie sovremennyh zharoprochnyh materialov i tehnologij ih proizvodstva dlja aviacionnogo dvigatelestroenija [The creation of modern high-temperature materials and production technologies for aviation engine] //Kryl'ja Rodiny. 2012. №3–4. S. 34–38.
  19. Bakradze M.M., Ovsepjan S.V., Shugaev S.A., Letnikov M.N. Vlijanie rezhimov zakalki na strukturu i svojstva shtampovok diskov iz zharoprochnogo nikelevogo splava JeK151-ID [Effect of tempering on the structure and properties of the disk forgings of heat-resistant nickel alloy EK151-ID] //Trudy VIAM. 2013. №9. St. 01 (viam-works.ru).
  20. Baldaev L.H. Renovacija i uprochnenie detalej mashin metodami gazotermicheskogo napylenija [Renovation and strengthening of machine parts methods of thermal spraying]. M.: Izd-vo KHT. 2004. 134 s.
  21. Petrov G.L., Burov N.G. Tehnologija i oborudovanie gazoplamennoj obrabotki metallov [Technology and equipment flame treatment of metals]. M.: Mashinostroenie. 1969. 288 s.
  22. Mazalov I.S., Filonova E.V., Lomberg B.S. Formirovanie struktury pri deformacii i termicheskoj obrabotke zagotovok detalej iz nikelevogo vysokoprochnogo svarivaemogo splava VZh172 [Structure formation during the deformation and heat treatment blanks welded high-strength nickel alloy VZH172] //Trudy VIAM. 2013. №12. St. 01 (viam-works.ru).
  23. Kablov E.N., Mubojadzhjan S.A. Ionnoe travlenie i modificirovanie poverhnosti otvetstvennyh detalej mashin v vakuumno-dugovoj plazme [Ion etching and surface modification of critical parts in machines vacuum arc plasma] //Vestnik MGTU im. N.Je. Baumana. Ser. «Mashinostroenie». 2011. №SP2. S. 149–163.
  24. Erasov V.S., Kotova E.A. Jerozionnaja stojkost' aviacionnyh materialov k vozdejstviju tverdyh (pylevyh) chastic [Erosion resistance to the effects of aircraft materials solid (dust) particles] //Aviacionnye materialy i tehnologii. 2011. №3. S. 30–36.
  25. Kablov E.N., Starcev O.V., Krotov A.S., Kirillov V.N. Klimaticheskoe starenie kompozicionnyh materialov aviacionnogo naznachenija. III. Znachimye faktory starenija [Climatic aging of composite materials aviation applications. III. Significant factors of aging] //Deformacija i razrushenie materialov. 2011. №1. S. 34–40.
  26. Bogorad L.Ja. Hromirovanie [Chromium-plating]. L.: Mashinostroenie. 1984. 97 s.
  27. Solodkova L.N., Kudrjavcev V.N. Jelektroliticheskoe hromirovanie [Electrolytic chrome]. M.: Globus. 2007. 191 s.
  28. Beljaev P.P., Zil'berfarb M.I., Garetovskaja M.P. Metallicheskie pokrytija v himicheskom mashinostroenii [Metal coatings in chemical engineering]. Sb. II. M.: Mashgiz. 1951. 144 s.
  29. Borisov V.S., Kasparova E.V. Himicheskoe nikelirovanie [Chemical nickel plating]. Sb. 2. M.: MDNTP im. F.Je. Dzerzhinskogo. 1958.
  30. Vishenkov S.A., Kasparova E.V. Povyshenie iznosostojkosti i zashhita ot korrozii detalej iz chernyh i cvetnyh metallov himicheskim nikelirovaniem [Wear resistance and corrosion protection of ferrous and non-ferrous metal chemical nickel plating] //Bjulleten' obmena proizvodstvenno-tehnicheskim opytom. 1958. №6. 208 s.
  31. Gorbunova K.M., Nikiforova A.A. Fiziko-himicheskie osnovy processa himicheskogo nikelirovanija [Physico-chemical foundations of electroless nickel plating]. M.: AN SSSR. 1960. 448 s.
  32. Rjabchenkov A.V., Velemicina V.I. Himicheskoe nikelirovanie kak sredstvo zashhity perlitnyh stalej ot vysokotemperaturnoj gazovoj korrozii. Vnutrennie naprjazhenija nikel'-fosfornyh pokrytij i ih vlijanie na ustalostnuju prochnost' stali [Chemical nickel plating as a means of protection pearlite steels from high-temperature gas corrosion. Internal voltage nickel-phosphorus coatings and their influence on the fatigue strength of steel] /Trudy CNIITMASh. 1961. №22. 37 s.
  33. Vishenkov S.A., Kasparova E.V. Povyshenie nadezhnosti i dolgovechnosti detalej mashin himicheskim nikelirovaniem [Improving the reliability and durability of machine parts electroless nickel plating]. M.: Mashgiz. 1963. 208 s.
  34. Vansovskaja K.M. Metallicheskie pokrytija, nanesennye himicheskim sposobom [Metal coatings deposited by chemical means]. L.: Mashinostroenie. 1985. 103 s.
  35. Gal'vanicheskie pokrytija v mashinostroenii [Electroplating in mechanical engineering]: Spravochnik v 2-h t. T. 1. /Pod red. M.A. Shlugera. M.: Mashinostroenie. 1985. 248 s.
  36. GOST 9.303–84. Pokrytija metallicheskie i nemetallicheskie neorganicheskie. Obshhie trebovanija k vyboru [Metallic and non-metallic mineral. General requirements for the selection].