UDC
543.51; 669.1
DOI
10.18577/2307-6046-2021-0-7-103-111
Article PDF (Russian) (706.57 KB)
How to cite
Alekseev A.V., Orlov G.V., Petrov P.S. Analysis of cobalt and nickel bases cathodes by X-ray fluorescence spectroscopy // Proceedings of VIAM. 2021. No. 7 (101). Ст. 11. URL: https://www.viam-works.ru. DOI: 10.18577/2307-6046-2021-0-7-103-111.

Analysis of cobalt and nickel bases cathodes by X-ray fluorescence spectroscopy

Alekseev A.V., Orlov G.V., Petrov P.S.
Abstract

In this work, Al, Cr, Cu, Fe, Ni, Si and Y were determined in SDP-6 cathodes based on cobalt and SDP-1 and AZh8 nickel-based cathodes by x-ray fluorescence spectroscopy. The calibration dependences are corrected taking into account the superposition of signals from interfering elements on the analytical signal and changes in intensity caused by inter-element influences in the matrix. A standard-free analysis was carried out using the method of fundamental parameters. The correctness of the results obtained was confirmed by a comparative analysis by atomic emission spectroscopy and high-resolution mass spectrometry with a glow discharge.

Keywords
x-ray fluorescence analysis, nickel alloys, cathodes, nickel analysis, cobalt analysis.
Reference list
  1. Kablov E.N., Bondarenko Yu.A., Echin A.B. Development of technology of cast superalloys directional solidification with variable controlled temperature gradient. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 24–38. DOI: 10.18577/2071-9140-2017-0-S-24-38.
  2. Kablov E.N., Sidorov V.V., Kablov D.E., Min P.G. The metallurgical fundamentals for high quality maintenance of single crystal heat-resistant nickel alloys. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 55–71. DOI: 10.18577/2071-9140-2017-0-S-55-71.
  3. Muboyadzhyan S.A., Budinovskij S.A. Ion-plasma technology: prospective processes, coatings, equipment. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 39–54. DOI: 10.18577/2071-9140-2017-0-S-39-54.
  4. Budinovskiy S.A., Muboyadzhyan S.A., Kosmin A.A. Ion-plasma coatings for the protection of industrial turbine blades from sulfide-oxide corrosion. Nauka i tekhnika v gazovoy promyshlennosti, 2010, no. 3, pp. 61–68.
  5. Farafonov D.P., Leshchev N.E., Afanasiev-Khody- kin A.N., Artemenko N.I. Abrasive wear-resistant seal materials of the gas turbine engine flow section. Aviacionnye materialy i tehnologii, 2019, No. 3 (56), pp. 67–74. DOI: 10.18577/2071-9140-2019-0-3-67-74.
  6. Kablov E.N., Chabina E.B., Morozov G.A., Muravskaya N.P. Conformity assessment of new materials using high-level CRM and MI. Kompetentnost, 2017, no. 2, pp. 40–46.
  7. State Standard 13047.10–2014. Nickel. Cobalt. Methods for the determination of copper. Moscow: Standartinform, 2015, pp. 2–4.
  8. State Standard 13047.8–2014. Nickel. Cobalt. Methods for the determination of silicon. Moscow: Standartinform, 2015, pp. 1–4.
  9. State Standard 13047.17–2014. Nickel. Cobalt. Methods for the determination of iron. Moscow: Standartinform, 2015, pp. 4–6.
  10. State Standard 13047.5–2014. Nickel. Cobalt. Methods for the determination of nickel in cobalt. Moscow: Standartinform, 2015, pp. 4–6.
  11. State Standard 8776–2010. Cobalt. Methods of chemical-atomic-emission spectral analysis. Moscow: Standartinform, 2011, pp. 12–18.
  12. Blokhin M.A. X-ray spectral research methods. Moscow State Publ. House of Phys.-Math. Literature, 1959, 388 p.
  13. Handbook of x-ray spectrometry. Ed. R.E. Van Grieken, A.A. Marcowicz. 2nd ed., rev. and expanded. New York: Marcel Dekker, Inc., 2001, pp. 14–56.
  14. Criss J.W., Birks L.S. Calculation methods for fluorescent X-ray spectrometry. Empirical coefficients vs. fundamental parameters. Analytical Chemistry, 1968, vol. 40, pp. 1080–1086.
  15. Mashin N.I., Lebedeva R.V., Tumanova A.N. X-ray fluorescence analysis of Ni – Fe – Mn – Cr systems. Analitika i kontrol, 2004, vol. 8, no. 2, pp. 160–164.